API 5L Grade X60 pipe

api-5l-grade-x60-pipe

API 5L X60 ERW Pipe, Carbon Steel API 5L X60 saw, welded Exporter

Bhawal Steel Agency is engaged to manufacture and supply API 5L grade X60, X42, X52, X56, X65, X70, X80 grades of pipes and custom-made specifications according to the clients. These steel pipes are found utilization across many industries, and we are the popular dealers of following API 5L pipe grades. API 5L X60 specifies the tubes suitable for conveying gas, water, and oil and natural gas sectors. These 4L seamless and welded steel line pipes comprise belled end pipes, plain end, threaded end, and pipe ends utilized with special couplings. ASTM A106 Grade A and B pipes aren't interchangeable with API 5L grades. API 5L X grades have a higher degree of indispensability; rolled rates are not acceptable, and reoperation is not permitted. Toughness tests for sour services and higher pressure and temperature settings are also given for special consideration of this alloy. API 5L x60 has good chemical properties, and the included substances are carbon up to 0.28%, manganese up to 1.2%, phosphorus up to 0.03%, sulfur and others. Whereas the addition of manganese results of their potential tend to segregate, they have a lower impact strength. The sulfur content is kept as low as 0.007% due to the minimum requirement needed. Ingots, blooms, coils, sheets or plates could also be constructed through elemental oxygen, furnace, or combinational with the ladle refining procedures.

The applications that benefit API 5L grades are gas and oil transportations, long pipelines, sour services, etc. API 5L specifies product level as PS 1 and PS2 seamless and welded steel and often utilized natural and petroleum gas transportation. And offshore service applications. PS 2, steel can be killed and melted along according to acceptable grain practices. API 5l Gr X60 can withstand a hydrostatic test without leakage through the weld seam or the pipe body. Jointers do not need hydrostatic tests, provided sections are already tested for use. For the Bend test, No cracks shall occur to any edge of the test piece, and also, no entrance of the weld needs to happen.

API 5l Grade X60 Pipes Specifications

Standard API 5L Grade B
Product Specification Level API 5L Product Specification Level 2
API 5L Product Specification Level 1
Sizes Np Size 1/2" to Sizes 48 upto Other Daimeter.
WT - Sch 10 to 160, XS, STD, XXS.
Service
  • Sand Blasting
  • ARO
  • Tar Epoxy
  • Annealed
  • Galvanizing
  • 3LPE
  • Machining etc.
  • Bending
  • Heat Treatment
Type ERW /Seamless / Fabricated / Welded / CDW
Other stockist JSL, MSL,ISMT, BAO, USL, Lontrin, TNRS, SMTM, and Wuxi
Applications Petrochemicals, Oil Refineries, Pressure Vessels, Power Generation, Sugar, Steel, Boiler Equipments
Test Methods
  • Hydrostatic test
  • Flattening test
  • DWT test for PSL2 pipe
  • CVN impact test for PSL2 pipe (including pipe body tests, pipe weld and HAZ tests)
  • Guided-bend test
  • Bend test
Length Double Random, Single Random, Any Sizes - 12 Meters
End Screwed, Bevel, Plain, Threaded
Thickness Schedule 40, 80, 160, XS, XXS

API 5L X60 Steel Pipe Dimension Tolerance

API 5L X60 Pipe types API 5L X60 Pipe Size (mm) Tolerances
Hot rolled API 5L X60 Seamless Pipe OD <50 ±0.50mm
≥50 ±1%
WT <4 ±12.5%
≥4~20 +15%, -12.5%
>20 ±12.5%
Cold drawn API 5L X60 Seamless Pipe OD 6~10 ±0.20mm
10~30 ±0.40mm
30~50 ±0.45
>50 ±1%
WT <1 ±0.15mm
>1~3 + 15%, – 10%
>3 + 12.5%, – 10%

 

 

API 5L X60 Material Standard

API 5L PSL 2 X60 Seamless Carbon Steel
Sizes: Out Diameter: 73-630mm, Wall Thickness: 6-35mm
Standard: API 5L
Application: For gas, water, transportation in Petroleum and natural gas industries
API 5L X60 Tube for Structural Purposes
Sizes: Out Diameter: 1-1/4"-16", Wall Thickness: 0.109"-0.562"
Standard: ASTM A53, ASTM A106, ASTM A500/501-98, ASTM A519-98, JIS G3441-1994, JIS G3444-1994, BS EN 10210-1
Application: Used in the general structure and the mechanism, including construction, machinery, transportation
API 5L X60 Boiler Pipe
Sizes: Out Diameter: 6.0mm-114.0mm, Wall Thickness: 1.0mm-15.0mm
Standard: GB3087-1999, ASTM A179, ASTM A106, JIS G3454
Application: Used for manufacturing superheated pipelines, the steam pipe, boiling water tube, flue tube, small flue tube, etc.
API 5L X60 Seamless Steel Tubes for Liquid Service
Sizes: Out Diameter: 19.05-168.3mm, Wall Thickness: 2.31-14.27mm
Standard: GB/T8163-1999, ASTM A53-98, JIS G3452-1998, JIS G3454-1998, ASTM A106, DIN 1629-1984
Application: For conveying of petroleum, gas and other fluids
API 5L X60 Line Pipe
Sizes: Out Diameter: 73-630mm, Wall Thickness: 6-35mm
Standard: API 5L
Application: For gas, water, transportation in Petroleum and natural gas industries
API 5L X60 Drill Pipe
Sizes: Out Diameter: 2-7/8"-6-5/8", Wall Thickness: up to 0.813"
Standard: API 5D
Application: For well drilling
API 5L X60 Petroleum Cracking Tube
Sizes: Out Diameter: 1.315"- 20", Wall Thickness: 0.133"-0.500"
Standard: GB9948-1988
Application: For manufacturing of furnace tubes, heat exchangers and pipelines in refineries

Api 5l X60 Pipes Pressure Rating Chart

Nominal Size
(mm)
Schedule no. Wall Thickness
(mm)
Temperature (°C)
-29 - 38 205 260 350 370 400 4301) 450
Maximum API 5L X60 Allowable Stress (MPa)
137.8 137.8 130.2 117.1 115.7 89.6 74.4 59.9
15 STD 40 2.77 34416 34416 32528 29255 28910 22372 18589 14972
XS 80 3.73 48092 48092 45466 40878 40396 31260 25969 20918
  160 4.78 62830 62830 59378 53404 52777 40837 33929 27333
XXS   7.47 98245 98245 92836 83507 82522 63857 53053 42739
20 STD 40 2.87 28070 28070 26526 23860 23578 18245 15158 12209
XS 80 3.91 39418 39418 37247 33506 33106 25617 21283 17142
  160 5.56 58152 58152 54955 49429 48843 37799 31398 25293
XXS   7.82 83107 83107 78539 70643 69809 54024 44881 36152
25 STD 40 3.38 26251 26251 24804 22310 22048 17060 14173 11417
XS 80 4.55 36283 36283 34285 30862 30474 23584 19595 15785
  160 6.35 52481 52481 49594 44606 44082 34112 28339 22827
XXS   9.09 77030 77030 72793 65476 64704 50070 41595 33506
32 STD 40 3.56 21614 21614 20421 18369 18155 14049 11672 9404
XS 80 4.85 30178 30178 28518 25651 25348 19616 16295 13125
  160 6.35 40596 40596 38364 34505 34099 26389 21924 17659
XXS   9.70 64601 64601 61045 54906 54266 41988 34884 28097
40 STD 40 3.68 19444 19444 18375 16529 16329 12636 10550 8454
XS 80 5.08 27402 27402 25900 23295 23019 17811 14800 11919
  160 7.14 39738 39738 37599 33816 33416 25858 21483 17308
XXS   10.16 58779 58799 55547 49966 49374 38205 31742 25569
50 STD 40 3.91 16378 16378 15468 13925 13759 10645 8847 7124
XS 80 5.54 23653 23653 22351 20105 19871 15378 12774 10287
  160 8.74 38866 38866 36731 33037 32652 25266 20987 16908
XXS   11.07 50793 50793 48003 43173 42670 33017 27429 22096
65 STD 40 5.16 17914 17914 16929 15227 15048 11644 9674 7793
XS 80 7.01 24818 24818 23447 21097 20849 16129 13401 10797
  160 9.53 34615 34615 32714 29420 29076 22503 18693 15055
XXS   14.02 53081 53081 50159 45116 44585 34498 28662 23088
80 STD 40 5.49 15558 15558 14969 13222 13063 10108 8399 6766
XS 80 7.62 21986 21968 20780 18693 18472 14290 11871 9563
  160 11.13 33079 33079 31253 28111 27780 21497 17859 14386
XXS   15.24 46976 46976 44392 39928 39459 30536 25369 20436
100 STD 40 6.02 13187 13187 12464 11210 11079 8571 7124 5739
XS 80 8.56 19058 19058 18010 16198 16012 12388 12094 8289
  120 11.13 25190 25190 23805 21407 21159 16371 13601 10995
  160 13.49 31019 31019 29310 26368 26058 20160 16750 13208
XXS   17.12 40348 40348 38129 34298 33892 26230 21786 17549
125 STD 40 6.55 11561 11561 10921 9825 9708 7510 6243 5038
XS 80 9.53 17060 17060 16122 14503 14331 11093 9212 7421
  120 12.70 23130 23130 21855 19657 19430 15034 12492 10059
  160 15.88 29407 29407 27787 24997 24701 19113 15881 12795
XXS   19.05 35897 35897 33926 30516 30158 23337 19388 15620
150 STD 40 7.11 10550 10550 9928 8924 8819 6828 5370 4568
XS 80 10.97 16474 16474 15571 14007 13842 10707 8895 7165
  120 14.27 21745 21745 20553 18448 18265 14138 11747 9460
XXS 160 18.26 28325 28325 26768 24074 23784 18410 15296 12319
200   20 6.35 7138 7138 6745 6063 5994 4637 3852 3100
  30 7.04 7924 7924 7489 6732 6656 5147 4279 3445
STD 40 8.18 9246 9246 8737 7855 7765 6008 4995 4024
  60 10.31 11741 11741 11093 9977 9860 7627 6339 5105
XS 80 12.70 14572 14572 13766 12388 12237 9474 7868 6338
  100 15.09 17452 17452 16488 14834 14655 11341 9426 7593
  120 18.26 21345 21345 20174 18148 17935 13876 11527 9288
  140 20.62 24308 24308 22971 20656 20415 15799 13125 10569
XXS   22.23 26334 26334 24877 22386 22124 17115 14221 11458
  160 23.01 27340 27340 25838 23240 22964 17769 14765 11892
250   20 6.35 5698 5698 5388 4844 4789 3707 3080 2480
  30 7.8 7028 7028 6642 5974 5905 4568 3796 3059
STD 40 9.27 8385 8385 7923 7131 7048 5450 4527 3652
XS 60 12.7 11596 11596 10955 9853 9736 7538 6263 5043
  80 15.09 13863 13863 13098 11781 11644 9012 7483 6028
  100 18.26 16922 16922 15992 14386 14214 10996 9136 7359
  120 21.44 20036 20036 18934 17032 16825 13022 10817 8716
XXS 140 25.4 23998 23998 16474 20394 20153 15599 12960 10438
  160 28.58 27229 27229 25734 23143 22875 17700 14703 11844
300   20 6.35 4795 4795 4534 4072 4024 3114 2591 2088
  30 8.38 6359 6359 6008 5402 5540 4134 3431 2763
STD   9.53 7241 7241 6842 6153 6084 4706 3914 3149
  40 10.31 7854 7854 7421 6676 6601 5015 4244 3417
XS   12.70 9722 9722 9191 8268 8165 6318 5250 4230
  60 14.27 10969 10969 10363 9322 9212 7131 5925 4768
  80 17.48 13525 13525 12850 11492 11362 8792 7303 5884
  100 21.44 16736 16736 15819 14227 14062 10879 9040 7283
XXS 120 25.4 20015 20015 18913 17011 16811 13008 10804 8702
  140 28.58 22682 22682 21435 19278 19051 14744 12244 9866
  160 33.32 26740 26740 25273 22730 22461 17383 14441 11630
350   10 6.35 4361 4361 4120 3707 3665 2831 2356 1895
  20 7.92 5457 5457 5161 4644 4589 3548 2949 2377
STD 30 9.53 6580 6580 6222 5595 5533 4279 3555 2866
  40 11.13 7717 7717 7310 6559 6477 5016 4168 3355
XS   12.70 8833 8833 8351 7510 7421 5739 4768 3845
  60 15.09 10541 10541 9963 8964 8861 6855 5691 4589
  80 19.05 13421 13421 12684 11410 11272 9723 7248 5836
  100 23.83 16949 16949 16019 14407 14242 11017 9157 7372
  120 27.79 19933 19933 18837 16943 16743 12960 10762 8675
  140 31.75 22964 22964 21703 19519 19292 14931 12402 9990
  160 35.71 26051 26051 24618 22144 21883 16936 14069 11334
400   10 6.35 3810 3810 3603 3238 3197 2474 2060 1660
  20 7.92 4768 4768 4507 4051 4004 3100 2577 2074
STD 30 9.53 5746 5746 5429 4885 4830 3734 3100 2501
XS 40 12.70 7703 7703 7283 6545 6470 5009 4126 3349
  60 16.66 10176 10176 9618 8654 8550 6614 5498 4430
  80 21.44 13208 13208 12478 11224 11093 8585 7131 5746
  100 26.19 16274 16274 15378 13835 13670 10576 8785 7076
  120 30.96 19409 19409 18341 16481 16302 12616 10480 8440
  140 36.53 23130 23130 21855 19657 19430 15034 12492 10059
  160 40.49 25824 25824 24404 21952 21697 16784 13945 11238
450   10 6.35 3383 3383 3197 2873 2839 2198 1826 1474
  20 7.92 4230 4230 3996 3597 3555 2749 2287 1839
STD   9.53 5099 5099 4816 4334 4286 3314 2756 2219
XS 30 11.13 5967 5967 5643 5071 5016 3879 3225 2598
    12.70 6835 6835 6456 5808 5739 4437 3686 2969
  40 14.27 7696 7696 7276 6545 6463 5002 4155 3349
  60 19.05 10349 10349 9784 8799 8695 6725 5588 4499
  80 23.83 13043 13043 12326 11086 10955 8475 7042 5670
  100 29.36 16219 16219 15323 13787 13622 10542 8757 7055
  120 34.93 19464 19464 18389 16543 16350 12650 10507 8468
  140 39.67 22282 22282 21056 18941 18713 11483 12030 9694
  160 45.24 25638 25638 24225 21793 21531 16660 13842 11155
500   10 6.35 3038 3038 2873 2574 2556 1977 1640 1323
STD 20 9.53 4582 4582 4327 3893 3852 2976 2474 1991
XS 30 12.70 6139 6139 5801 5216 5154 3989 3314 2666
  40 15.09 7317 7317 6911 6215 6146 4754 3948 3183
  60 20.62 10080 10080 9522 8564 8468 6552 5443 4382
  80 26.19 12898 12898 12188 10962 10831 8385 6966 5608
  100 32.54 16171 16171 15287 13746 13580 10514 8730 7035
  120 38.10 19085 19085 18037 16226 16033 12409 10307 8302
  140 44.45 22475 22475 21242 19106 18879 14614 12140 9777
  160 50.01 25450 25450 24094 21675 21421 16577 13766 11093
600   10 6.35 2529 2529 2391 2150 2129 1647 1364 1102
STD 20 9.53 3810 3810 3603 3238 3197 2474 2060 1660
XS   12.70 5097 5097 4816 4334 4286 3314 2756 2219
  30 14.27 5739 5739 5423 4878 4823 3734 3100 2494
  40 17.48 7055 7055 6670 5994 5925 4589 3810 3066
  60 24.61 10018 10018 9467 8516 8420 6511 5409 4361
  80 30.96 12691 12691 12002 10783 10659 8254 6856 5519
  100 38.89 16102 16102 15220 13690 10528 10466 8695 7007
  120 46.02 19223 19223 18168 16336 16150 12491 10383 8364
  140 52.37 22048 22048 20835 18741 18520 14331 11906 9591
  160 59.54 25279 25279 23888 21489 21235 16433 13649 10996
                     

Dimension Standard of X60 Psl 2 Pipe

NB DN OD (inches) API 5L X60 Pipe Schedule
SCH 5 SCH 10 SCH
20
SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160
3/4" 20 1.05 0.065 0.11 x 0.095 0.113 x x 0.17 x 0.219
1" 25 1.315 0.065 0.11 x 0.114 0.133 x x 0.2 x 0.25
1.1/2" 40 1.9 0.065 0.11 x 0.125 0.145 x x 0.225 x 0.281
2" 50 2.375 0.065 0.12 x x 0.154 x x 0.25 x 0.344
2.1/2" 65 2.875 0.083 0.12 x x 0.203 x x 0.3 x 0.375
3" 80 3.5 0.083 0.12 x x 0.216 x x 0.35 x 0.438
4" 100 4.5 0.083 0.12 x x 0.237 x x 0.437 x 0.531
5" 125 5.563 0.109 0.12 x x 0.258 x x 0.5 x 0.625
6" 150 6.625 0.109 0.13 x x 0.28 x x 0.562 x 0.719
8" 200 8.625 0.109 0.15 0.25 0.277 0.322 0.406 0.593 0.718 0.812 0.906
10" 250 10.75 0.134 0.17 0.25 0.307 0.365 0.5 0.718 0.843 1.0 1.125
12" 300 12.75 0.165 0.18 0.25 0.33 0.406 0.5 0.843 1.0 1.125 1.312

Api 5l X60 Smls Pipe Standard Application

Standards Grades Applications
API API 5L Line pipe for pipeline transportation systems
API 5CT Tubing and casing for wells
API 5DP Drill Pipe for well drilling

API 5l Grade X60 PSL 2 Chemical Material Composition

X60 PSL1 X60 PSL2
Grade P C S Mn S C P Mn
X60 0.03 0.26 0.03 1.40 0.015 0.22 0.025 1.45
API 5L-PSL 2 Chemical Requirements
Grade Composition, %
C Si Mn P S V Nb Ti Other
BN 0.24 0.4 1.2 0.025 0.015 c c 0.04 e,l
X60N 0.24 0.45 1.4 0.025 0.015 0.1 0.1 0.04 g,h,l
BQ 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e,l
X60Q 0.18 0.45 1.7 0.025 0.015 g g g h,l
Grade Chemical Composition
    C Si Mn P S V Nb Ti
API 5L X60 0.16 0.45 1.65 0.020 0.010 0.08 0.05 0.04

L415 Grade X60 Pipe Material Minimum Yield Strength Chart

Pipe Grade Tensile Strength - X60 Pipe Body of SMLS and Welded Pipes PSL 1 Seam of X60 Welded Pipe
Yield Properties a Tensile Properties a Elongation Tensile Properties b
Rt0,5 PSI Min Rm PSI Min (in 2in Af % min) Rm PSI Min
X60 60,200 75,400 c 75,400

 

Pipe Grade Tensile Strength - X60 Pipe Body of SMLS and Welded Pipes PSL 2 Seam of X60 Welded Pipe
Yield Properties a Tensile Properties a Ratio a,c Elongation Tensile Properties d
Rt0,5  PSI Min Rm  PSI Min R10,5IRm (in 2in) Rm (psi)
      Af %  
X60N, X60Q,S60M 60,200 81,900 75,400 110,200 0.93 f 75,400


Related Products



Industries We Serve

Chemical Research Industries

Petroleum and Gas Industries

Agriculture Engineering Industries

Mechanical Engineering Industries

Civil Engineering Industries

Get a Quote

Request A Quote