WELCOME TO BHAWAL STEEL AGENCY, Stainless Steel Pipe, Stainless Steel Round pipe , Stainless Steel Square pipe , Stainless Steel Rectangular pipe, Stainless Steel ERW Pipe, Stainless Steel Seamless Pipe, Stainless Steel tube, carbon Steel pipe , Carbon Steel ERW Pipe, carbon Steel tube, Carbon Steel Seamless Pipe, alloy Steel pipe, alloy Steel erw pipe, alloy Steel tube , Alloy Steel Seamless Pipe, mild Steel pipe, mild Steel erw pipe, mild Steel tube , Mild Steel ERW Pipe , IBR Pipes, Polish Pipe, Duplex Pipe, Galvanized Pipe, NACE Pipe, Large Diameter Pipe, Low Temperature Carbon Steel Pipe, Cast Iron Carbon Steel Seamless Pipes, Cupro Nickel Pipe, Fabricated Pipe, Stainless Steel 347 grade Pipe , Stainless Steel 321 Grade Pipe, Stainless Steel 304 Grade Pipe

.:: TECHNICAL INFORMATION

CHEMICAL COMPOSITION ( IN PERCENTAGE )
Grade	C (Max)	Mn (Max)	P (Max)	S (Max)	Si (Max)	Cr	Ni	Mo	Nitrogen (Max)	Cu/ Others
301	0.15	2.00	0.045	0.030	1.00	16.00 - 18.00	6.00 - 8.00	-	0.10	-
304	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00- 10.50	-	0.10	-
304L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00- 12.00	-	0.10	-
310S	0.08	2.00	0.045	0.030	1.50	24.00- 26.00	19.00 - 22.00	-	-	-
316	0.08	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10	-
316L	0.030	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10	-
317	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 14.00	3.00 - 4.00	0.10	-
317L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 15.00	3.00 - 4.00	0.10	-
321	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 12.00	-	0.10	Ti5 ( C + N ) Min or 0.70 max
347	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 13.00	-	-	Cb= 10x ( C Min ) or 1.00 Max
409	0.08	1.00	0.040	0.010	1.00	10.50 - 11.75	0.50	-	-	Ti= 6x (C+ N ) Min or 0.70 Max
409M	0.03	0.81.2	0.030	0.030	0.40.75	11.00- 12.00	1.5 max.	-	-	Ti= 6x (C) Min or 0.70 Max
410S	0.08	1.00	0.040	0.030	1.00	11.50- 13.50	0.60	-	-	-
410	0.15	1.00	0.040	0.030	1.00	11.50- 13.50	0.75	-	-	-
420	0.35	0.50	0.035	0.015	0.50	12.00 - 13.00	0.20.3	-	-	-
430	0.12	1.00	0.040	0.030	1.00	16.00 - 18.00	0.75	-	-	-
JSL AUS	0.08	7.08.0	0.070	0.030	0.75	15.50 - 16.50	4.25 - 4.75	-	-	0.9 - 1.10
JS- 203	0.08	9.2510.25	0.070	0.030	0.75	14.25 - 15.25	2.25 - 2.75	-	-	1.60- 2.0
301M	0.10	4.55.5	0.060	0.030	0.75	14.50 - 15.50	6.0 - 7.0	-	-	1.70- 1.90
* Thickness of 1.27mm & below will have elongation of 20% min.